Phoenix-E
Phoenix-E
Mailing Address:
339 Mobil Ave.,
Camarillo, CA 93010
Phone: 800.241.4207
Fax: 805.987.2495
E-Mail: info@phoenix-e.com
Website: www.phoenixe.com
Print Back
SonoCon acoustical foams provide sound absorption together with sound transmission loss by bonding a flexible noise barrier to the foam panel. The panels can be configured with sound absorbing foam on both sides of the barrier to assist in decoupling the barrier from a vibrating, sound transmitting surface or on one side only for adding mass and sound absorption to a light gage equipment housing.

Depending upon the application, the SonoCon acoustical foams and foam barrier composites are offered with protective facings which prevent contamination from the immediate environment. Selection of the facings range from thin polyethylene films to rugged plastic or vinyl surfaces suitable for sound isolating floor mats or tractor or truck headliners to perforated wear surfaces to aluminized membranes.

Panels can be attached using conventional compatible adhesives or pressure sensitive adhesives though mechanical fasteners are recommended for larger panels.
Unit of Measure

Specifications

Brands

 N/A Phoenix-E

Sound Transmission Class (STC) Rating

 N/A 20 to 26

High Noise Reduction Coefficients (NRC)

 N/A 0.31 to 0.90

Thickness

 N/A 1 in1/2 in1/4 in2 in4 in

Applications

 N/A Acoustically treat sheet metal equipment enclosures. Isolate decks and other walking surfaces from noise below. Isolate truck cabs from engine and road noise.

Additional Information

Additional Information

 N/A Since most applications are unique, please contact Phoenix-E for assistance is selecting a particular foam-barrier system.

Acoustical Performance of the faced foam and foam barrier composites

Sound transmission class ratings range from STC 20 to STC 26 depending upon the weight of the barrier.

Noise reduction coefficient ratings range from 0.31 to 0.90 depending upon the foam thickness.